Oregon DS8618 - Manual (Page 12)

EN
8
ZOOMING
1. : WIDE button [Zoom out]
2. : TELE button [Zoom in]
Your digital camera comes with a 4x digital zooming function.
1. In both Capture and Playback Modes, increase zooming by
pressing the button. The hollowed white bar along the ride
side of the LCD indicates the current zoom level. (Watch it move
as you zoom in or zoom out).
2. To decrease the zooming, press the button.
USING THE SELF-TIMER
The Self-Timer function counts down from 10 seconds before the
camera automatically takes a picture by itself. This is useful when you
want to be in the picture and there is no one else to press the SHUTTER
RELEASE button.
To activate the Self Timer:
1. Slide the Mode Switch to Capture Mode.
2. Press to activate the Self-Timer function. The Self-Timer red
LED light comes on and the Self-Timer icon appears on the
LCD.
TIP: If you wish to cancel the Self-Timer function at this stage, press
again and the icon on the LCD will disappear.
3. Press the SHUTTER RELEASE button. Audible beeps can be
heard, and the Self-Timer lamp will start blinking. The number
displayed next to the LCD's Self-Timer icon will appear and start
counting down from 10 seconds.
4. Press the SHUTTER RELEASE button again anytime during
the countdown between 10 and 4 seconds and the Self-Timer
will jump to count down from 3 seconds.
NOTE: Press the SHUTTER RELEASE button again between
3 seconds to 1 second during the count down to cancel the Self-Timer
function.
DS8618 EngManl r20(V1.1) OP 11/17/04, 2:39 PM 9
¶´ƒ