Oregon DS8618 - Manual (Page 34)

EN
30
5. With the thumbnail frame flashing, use the direction button to
press or to set the number of prints for the selected image
(up to a maximum of 9 for the selected image).
6. When done, press the DISP button once again.
7. Press the SET button, and then press the SET button again to
confirm selection.
Repeat steps 4-6 to select more images for printing or change the
previously specified numbers.
To specify the DPOF of all images:
1. When "All" is selected from the Menu screen, all images will be
set to the same specified printing number.
2. Use the direction button to press or to set the number of
prints of all stored images.
3. When done, press the DISP button once again.
4. Press the SET button, and then press the SET button again to
confirm selection.
COPYING FILES
To copy files:
1. Press the MENU button while in Playback mode.
2. Select the "Copy" function (press to choose copying files
function).
3. Press the button to access choice of memory card or camera.
4. Press the SET button to confirm.
You can either copy all camera files to the memory card or you can
copy selected files from the memory card to your internal memory.
FROM INTERNAL MEMORY TO MEMORY CARD
1. Press the SET button to select and confirm the option (of copying
files to the memory card).
2. Press the SET button to confirm the option and press the MENU
button to cancel.
DS8618 EngManl r20(V1.1) OP 11/17/04, 2:39 PM 31
¶´ƒ