Oregon DS8618 - Manual (Page 36)

EN
3. Connect the video cable's yellow connector to the yellow AV
input terminal of your TV.
4. Turn the TV and camera on. Make sure to switch the TV to the
appropriate AV channel display.
NOTE: The LCD is automatically turned off when the camera is
connected to a TV.
NOTE: All image / movies can be viewed in Playback Mode or the
camera can be used as a TV Cam in Record Mode.
INSTALLING SOFTWARE DRIVERS
(WINDOWS-BASED PC)
Use the USB cable included to connect the camera to your Windows-
based PC. This enables you to transfer, edit, and playback pictures
and movies onto your PC.
Users of Windows 98SE-based PCs must install the software first
before connecting the camera to the computer.
To install the software driver:
1. Insert the CD labeled "DS8618" into your CD-ROM drive. The
installation will start automatically.
2. If the "auto-run" feature is disabled on your PC, start the
installation by running [x:\setup.exe] where "x:" is the drive letter
of the CD-ROM drive.
3. Follow the on-screen instruction to complete the installation of
the camera drivers and software. When done, click on the FINISH
button on-screen to restart the PC.
NOTE: Macintosh computers do not require software driver installation.
TRANSFERRING FILES FROM CAMERA TO PC OR
MACINTOSH
Only the images and movies stored in your camera's current memory
device (SD card / MMC or internal memory) will be visible on your PC
or Macintosh.
32
DS8618 EngManl r20(V1.1) OP 11/17/04, 2:39 PM 33
¶´ƒ