Oregon DS8618 - Manual (Page 17)

EN
CAMERA MODES
The camera has 5 still-picture capture modes and 1 movie mode.
To choose a mode:
1. Press the MENU button.
2. Press the button.
3. Use or to navigate through the various modes and press
the SET button to confirm a selected mode.
STILL-PICTURE MODES
• AUTO mode (camera mode) - Use this mode when you want to
capture images without needing to tweak manual settings. This
mode is fully automatic.
• SCENE mode - Select this mode when you want to define the
scene of the captured image in the following ways: Portrait,
Landscape, Night Portrait, Night Landscape, Backlight, Sports
(Fast Shutter), Indoor, Dawn and Sunset.
• PROG mode (manual camera mode) - Use this mode when you
want to capture images using the camera's features manually.
This will give you greater power over the look of the image
captured.
• S mode (shutter-speed priority) - Use this mode when capturing
images that are moving. The camera focuses on capturing the
image with a faster shutter-speed.
• A mode (aperture size priority) - Use this mode when you want
to have greater aperture control when capturing an image. For
example, if you want to let more light into the image then you
can when in this mode.
• Setup mode - Use this to determine camera settings.
NOTE: For shutter-speed priority mode and aperture priority mode,
you can set the shutter-speed and/or aperture respectively by pressing
the SET button to activate the setting (the shutter speed and aperture
value will be flashing) and then use the or
buttons to increase or
decrease shutter-speed or aperture.
13
DS8618 EngManl r20(V1.1) OP 11/17/04, 2:39 PM 14
¶´ƒ