Oceanic Dive Computer Pro Plus 2 - Manual (Page 87)

87
X
X
X
X
Battery Removal
Examine the Case Back to locate the Battery Hatch (Fig. 96a):
• Remove the 4 screws that secure the Battery Hatch to the
Housing by turning counter clockwise.
• Lift the Hatch up and away from the Housing.
• Lift the Battery, positive (+) end first, out of the Battery
Compartment.
• Remove the Battery Hatch O-ring and inspect it for any
signs of deterioration or deformity. DO NOT use tools to
remove the O-ring.
• O-ring replacement is highly recommended to ensure
proper sealing.
• Closely examine the sealing surfaces of the Battery Hatch
and Housing for any signs of damage that might prevent
proper sealing. If found, return the Pro Plus 2 to an
Authorized Oceanic Dealer, and DO NOT attempt to use
it until it has received factory service.
• Closely examine the inside of the Battery Compartment for
any signs of corrosion indicating entrance of moisture into
the unit.
• If corrosion is found, return the Pro Plus 2 to an Autho-
rized Oceanic Dealer, and DO NOT attempt to use it until
it has received factory service.
(continued on page 88)
Fig. 96 - Battery Hatch
a