Specifications (continued) – Oceanic Dive Computer Pro Plus 2 User Manual

Page 94

Advertising
background image

94

OPERATIONAL PERFORMANCE (continued)

Altitude:

• Operational from sea level to 14,000 feet (4,267 meters) elevation

• Measures ambient pressure every 30 minutes and when manually activated (no when wet contacts are bridged)

• Compensates for Altitude when manually activated (no compensation if activated by immersion in water)

• Compensation begins at 2,000 feet (610 meters) elevation and every 1,000 feet (305 meters) higher

Power:

• Battery

1 - 3 vdc, CR2, .75 Ahr, Lithium battery (Duracell model DL-CR2 or equivalent)

• Shelf life

Up to 5 years

• Replacement

User replaceable (annual recommended)

• Life expectancy

50 dive hours (if 1 - 1 hour dive per dive day) to over 150 dive hours (if 3 - 1 hour dives per dive day)

Battery Indicator:

segments displayed

estimated power remaining

all

25 to 100%

1 (inside)

< 25%

Activation:

• Manual - push button (recommended)

• Automatic - by immersion in water (as a backup if set ON)

• H2O graphic indicates Wet Contacts are bridged (unit must be dried prior to transport or storage)

• Cannot be manually activated deeper than 4 feet (1.2 meters), if the Water Activation feature is set OFF.

• Cannot be activated at elevations higher than 14,000 feet (4,267 meters)

Shutoff:

• Automatically shuts off if no dive is made within 120 minutes after initial activation. Reactivation required.

• Automatically shuts off 24 hours after last dive (will reactivate if the H2O graphic is displayed).

• Cannot be shut off manually.

SPECIFICATIONS (CONTINUED)

Advertising