Oricom TCR10 - Manual (Page 11)

7 Important Information
7.1 Troubleshooting
If you feel this product is not working correctly please consult the user guide and
ensure that you are using the product in accordance with the instructions.
Remove all extra telephone equipment and connect only this telephone directly to
the telephone socket.
If the fault is still present, connect another telephone (if available) to the
telephone socket. The results will show you whether the fault lies with this unit or
with the telephone line. If the product is working correctly the fault is on the
telephone line. Please contact your network operator for assistance
In the case of technical problems with this product please consult our website for
further information or send us an email for a prompt response to your enquiry.
7.2 Cleaning and care
Temperature and ambient conditions
The telephone is designed for indoor use (temperature range of -10 °C to 50 °C).
Do not install the telephone in areas where there is the risk of an explosion,
excessive exposure to smoke, dust, vibrations, chemicals, moisture, and heat. The
unit must not be installed in damp locations such as a bathroom or laundry, do
not expose the unit to direct sunlight.
Cleaning and care
The surface of the case can be cleaned with a dry, soft, lint-free cloth. Never use
cleaning agents, particularly aggressive solvents. Apart from occasional cleaning
of the case, no other care is necessary. The rubber feet of the base station are not
resistant to all cleaning agents. The telephone feet do not normally leave any
marks on the surface. However, on account of the multitude of varnishes and
surface finishes used, surface marks caused by the feet of the unit cannot be
ruled out. The manufacturer can therefore not be held responsible for possible
damage to furniture or the like.
11