Oricom TCR10 - Manual (Page 7)

4.2 Setting the alarm
To turn on the alarm, press the ALARM SET button. The icon and the current
alarm time will be flashing and the time of alarm will be shown. After 5 seconds
elapse, the icon comes on to indicate that the clock alarm is on.
To turn off the alarm, press the ALARM SET button again. The icon will be off.
4.3 Using the Snooze button
When the clock alarm sounds, you can use the SNOOZE button to temporarily
turn off alarm. The alarm will come on again after 10 minutes. To turn off the
alarm, press any other buttons on the base unit.
Note: In case of AC power failure, the LCD backlight will beturned off to conserve
power. Press the SNOOZE button to luminate the clock display.
4.4 Using the radio
Use the RADIO ON/OFF , the radio LED comes on to indicate the radio is on.
To turn off the radio, press the RADIO ON/OFF button again. The radio LED
tuns off to indicate the radio is off.
Use the Radio Volume Switch located at the right side of the unit for adjusting
the radio volume.
Your TCR10 has both FM and AM radio reception. Press the RADIO FM/AM
button to select FM or AM radio stations.
To select the radio channel frequency, use the UP/HOUR button to increase the
radio frequency or you use the DOWN/MIN button to decrease the radio
frequency. If you press and hold the button for 1 second, the unit will start auto
frequency search. The frequency will search for the next available good radio
station.
Note: The Radio alarm will play the last selected radio station and the radio
alarm level will be the last volume setting.
7