Oricom TCR10 - Manual (Page 9)

5.2 Making a call using the speed dial buttons
1. Lift the handset.
2. Press the MEM button
3. Now press the required storage location between 0 and 9 on the keypad. The
stored number will be dialled automatically.
4. To end the call, replace the handset.
Tip!
You can make calling via multiple telephone network providers considerably
easier. Save their access numbers and the telephone numbers separately in
different storage locations. First dial the memory location for the network provider
and then the memory location for the required telephone number or dial the
required telephone number manually.
5.3 Adjustable ringer volume
You can use the RINGER slide switch on handset to select the settings HI (loud)
or LO (soft) to adapt the ringer volume to your requirements. Should you not
want to be disturbed, select OFF (off). The TCR10 also has a visual ring indicator,
the light under the display will come on whenever the phone rings.
5.4 Last Number redial
If a number that you have dialled is engaged or did not answer, simply replace
the handset. The last number dialled will be saved in the telephone automatically.
To use the redial facility, proceed as follows:
1. Lift the handset.
2. Press the REDIAL button the saved redial number will now be dialled.
9