Onkyo Network TX-8050 - Manual (Page 21)

En-
21
Enjoying Audio Sources —Continued
Press the remote controller’s [AUDIO]
button repeatedly to select the listening
mode. The setting will change as follows
each time you press the [AUDIO] button.
When the Stereo indication is shown, pressing the
[AUDIO] button will make the display indicate “Music
Optimizer: On” for several seconds, and the “M.Opt”
indicator will also light. In this state, you can enjoy
stereo sound enhanced by the Music Optimizer function.
When the DIRECT function is off, the tone controls can
be used to adjust the sound, and the DIRECT indicator
goes off.
When the DIRECT function is on, the tone controls are
bypassed, so you can enjoy pure sound. The DIRECT
indicator lights up.
You can configure whether the DIRECT function is
applied or not for input sources individually.
The Music Optimizer function enhances the sound
quality of compressed music files.
To cancel the Music Optimizer function, press the
[AUDIO] button repeatedly to make the “M.Opt”
indicator disappear.
To cancel the DIRECT function, press the remote
controller’s [AUDIO] button repeatedly to select Stereo.
Note:
The Music Optimizer function only works with PCM
digital audio input signals with a sampling rate below 48
kHz and analog audio input signals.
The Music Optimizer is disabled when the Direct or Pure
Audio listening mode is selected.
Pressing the [PURE AUDIO] button on
the receiver activates the Pure Audio
listening mode.
The Pure Audio listening mode allows
you to enjoy purer sound by disabling
the video signal output and turning off
the indication in the display.
In the Pure Audio listening mode, the tone controls are
bypassed and adjustments using the BASS and TREBLE
controls are ignored.
Pure Audio listening mode can be turned on/off
individually for each input source.
Note:
• You can’t select Pure Audio mode if Zone 2 is on.
To cancel the Pure Audio listening mode, press the
receiver’s [PURE AUDIO] button.
AUDIO
PURE AUDIO
Selecting the Listening Mode
Direct Mono Pure Audio
Stereo Stereo (M.Opt: ON)
Enjoying the Pure Audio Sound