Onkyo Network TX-8050 - Manual (Page 40)

En-
40
Advanced Setup
Here’s how to change the Advanced Setup settings.
Example: Intelli volume setting procedure
Intelli Volume
With IntelliVolume, you can set the input level for each
input selector individually. This is useful if one of your
source components is louder or quieter than the others.
Use the arrow []/[] buttons to set the level.
If a component is noticeably louder than the others, use
the arrow [] button to reduce its input level. If it’s
noticeably quieter, use the arrow [] button to increase
its input level. The input level can be adjusted from
–12 dB to +12 dB in 1 dB steps.
1 Turn on the power.
2 Press the [SETUP] button on the remote
controller.
The setup menu appears in the display.
3 Use the arrow []/[] buttons to select
“2. Source Setup,” and then press [ENTER].
The Hardware setup menu appears in the display.
4 Use the arrow []/[] buttons to select
“Intelli volume: 0 dB”.
5 Change the Intelli volume to “–2 dB” using
the arrow []/[] buttons.
6 Press the [SETUP] button on the remote
controller to complete the setting.
Notes:
• This procedure can also be performed on the receiver
by using [SETUP], TUNING []/[], PRESET []/
[], and ENTER.
• Press [RETURN] to return to the previous menu.
Changing the Advanced Setup
Settings
ENTER
&/(/#/5
SETUP RETURN
PRESET C/U
ENTER RETURN SETUP
TUNING F/H