Onkyo TX-DS787 - Manual (Page 36)

36
Input Setup
Menu
1.Speaker Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
5.OSD Setup
|ENTER| Quit:|OSD|
2.Input Setup
Input:DVD
a.Audio Setup
b.Video Setup
c.Listening Mode Preset
d.Tone Control
e.IntelliVolume
f.12V Trigger
|ENTER| Quit:|OSD|
2-2.Video Setup
Input:DVD
a.Video :DVD
b.Component Video
:Input1
Quit:|OSD|
a. Video
This setting allows you to match the audio from one component
with the video from another. Therefore, you can set a video source
to be displayed while the audio from another input source is heard.
For example, this allows you to play the music from a compact
disc, while displaying the picture from a video cassette player or
other video source.
The default settings are given below.
2-2. Video Setup sub-menu
Input source selected Video
CD Last
PHONO Last
FM Last
AM Last
TAPE Last
DVD DVD
VIDEO1 VIDEO1
VIDEO2 VIDEO2
VIDEO3 VIDEO3
VIDEO4 VIDEO4
Last : When you change to an input source set to “Last,” the video
of the input source that you changed from is continued. For
example, if the selected input source is VIDEO 1, and you then
change to CD (set to “Last”), then the audio from the CD input
is played while the video from VIDEO 1 continues.
• If no video signal is to be assigned to the input source, set “----.”
b. Component
If a component is connected to the one of the COMPONENT
VIDEO inputs (1 or 2), then that input must be set here. This
setting will not appear if AM, FM, PHONO, CD or TAPE is
selected as the input source.
The default settings are given below.
Input source selected Component video input
CD
PHONO
FM
AM
TAPE
VIDEO 4 ----
VIDEO 3 INPUT 2
VIDEO 2/VCR 2 ----
VIDEO 1/VCR 1 ----
DVD INPUT 1
---- : Not assigned with the default settings.