Onkyo TX SR507 - Manual (Page 18)

18
Connecting the AV receiver
—Continued
■ TX-SR507
The following illustration shows which speaker should be connected to each pair of terminals for 7.1-channel playback .
If you’re using only one surround back speaker, connect it to the SURR BACK L terminals.
Connect your Power amplifier’s analog audio output jacks to the AV receiver's PRE OUT:SURR BACK L/R jacks with
an audio cable.
■ TX-SR577
The following illustration shows which speaker should be connected to each pair of terminals for up to 7.1-channel playback.
If you’re using only one surround back speaker, connect it to the SURR BACK L terminals.
Note:
The speakers are configured by using the “Speaker Settings” on page 40 and “Speaker Setup” on page 66.
AUDIO
INPUT
L R
Surround
back left
speaker
Surround
back right
speaker
Front left
speaker
Front right
speaker
Center
speaker
Surround right
speaker
Surround left
speaker
Power amplifier
Surround
right
speaker
Front right
speaker
Front left
speaker
Surround
back left
speaker
Surround
left
speaker
Surround
back right
speaker
Center
speaker
Front high
right speaker
Front high
left speaker