Omega Vehicle Security HHP-2000 Series User Manual

Page 5

Advertising

ADVANCED FUNCTIONS

The following additional functions apply to models HHP-2080,

2081, 2082, 2083, 2084, 2085

ADVANCED FUNCTIONS

The following additional functions apply to models HHP-2080,

2081, 2082, 2083, 2084, 2085

RANGE LOCK

This instrument has a Range Lock feature that displays readings to

the best resolution, shown by / on the display. This can be

turned off by pressing the

key. The display will then use the

same display resolution for the entire pressure range. This is useful

to stop the display switching between resolutions where there are

fluctuations in pressure. To cancel this mode, press the

key

again.

A R

RANGE LOCK

This instrument has a Range Lock feature that displays readings to

the best resolution, shown by / on the display. This can be

turned off by pressing the

key. The display will then use the

same display resolution for the entire pressure range. This is useful

to stop the display switching between resolutions where there are

fluctuations in pressure. To cancel this mode, press the

key

again.

A R

NOTE: To reset MAX/MIN recorder function switch the instrument

off.

NOTE: Some functions may be inhibited while information is

stored in either Auto, Manual or Max/Min modes. This is to

prevent inadvertent parameter mixing whilst in any of the above

modes. To re-activate these functions please delete any stored

information by following the “Output of data” section.

NOTE: To reset MAX/MIN recorder function switch the instrument

off.

NOTE: Some functions may be inhibited while information is

stored in either Auto, Manual or Max/Min modes. This is to

prevent inadvertent parameter mixing whilst in any of the above

modes. To re-activate these functions please delete any stored

information by following the “Output of data” section.

SETTING INTERNAL CLOCK

Press d

(•) key and the

and

symbols will appear

on display with the current year and month settings

Key in new year and month if desired and press

key to accept.

Display will show current date of month setting (DD). Key in new

value if desired and press

key to accept.

Display will show current hours and minutes setting (24 hour clock).

Key in new values if desired and press

key to accept. Instrument

will then return to normal mode.

ecimal point

(YYMM).

SETTING INTERNAL CLOCK

Press d

(•) key and the

and

symbols will appear

on display with the current year and month settings

Key in new year and month if desired and press

key to accept.

Display will show current date of month setting (DD). Key in new

value if desired and press

key to accept.

Display will show current hours and minutes setting (24 hour clock).

Key in new values if desired and press

key to accept. Instrument

will then return to normal mode.

ecimal point

(YYMM).

LOGGING

These models have functions that enable the user to store and

retrieve up to 250 readings and output such to a PC or Epson

compatible printer via Omega’s infrared HHP-2000DL. Omega also

offers MLWIN, a customised Windows™ software package.

Note: Some functions may be inhibited while information is stored in

either Auto, Manual or Max/Min modes. This is to prevent

inadvertent parameter mixing whilst in any of the above modes.

To re-activate these functions please delete any stores information

by following the "Output of data" section.

LOGGING

These models have functions that enable the user to store and

retrieve up to 250 readings and output such to a PC or Epson

compatible printer via Omega’s infrared HHP-2000DL. Omega also

offers MLWIN, a customised Windows™ software package.

Note: Some functions may be inhibited while information is stored in

either Auto, Manual or Max/Min modes. This is to prevent

inadvertent parameter mixing whilst in any of the above modes.

To re-activate these functions please delete any stores information

by following the "Output of data" section.

LOGGING ON DEMAND

This function allows readings to be stored as and when required. A

maximum of 50 readings can be stored this way.

When ready to store a reading press

key.

symbols

and will appear on the display. It is possible to enter up to a four

digit reference number including decimal point. Press

key to

enter and store reading, time, date and reference number.

Instrument will return to standard mode, however

symbol will

remain on display until data is erased.

LOGGING ON DEMAND

This function allows readings to be stored as and when required. A

maximum of 50 readings can be stored this way.

When ready to store a reading press

key.

symbols

and will appear on the display. It is possible to enter up to a four

digit reference number including decimal point. Press

key to

enter and store reading, time, date and reference number.

Instrument will return to standard mode, however

symbol will

remain on display until data is erased.

PRESET INTERVAL LOGGING

This function allows readings to be taken automatically at a preset

time interval.

NOTE: If data is already stored, as signified by the

symbols appearing on display, this function will not operate.

PRESET INTERVAL LOGGING

This function allows readings to be taken automatically at a preset

time interval.

NOTE: If data is already stored, as signified by the

symbols appearing on display, this function will not operate.

OMEGAnet On-Line Service

http://www.omega.com

OMEGAnet On-Line Service

http://www.omega.com

Internet e-mail

[email protected]

Internet e-mail

[email protected]

Servicing North America:

For immediate technical or application assistance:

Servicing Europe:

USA:

ISO 9001 Certified

USA:

ISO 9001 Certified

Canada:

USA and Canada:

Mexico and

Latin America:

Mexico and

Latin America:

Benelux:

Postbus 8034, 1180 LA Amstelveen, The Netherlands

Tel: (31) 20 6418405

Toll Free in benelux: 0 800 0993344

e-mail: [email protected]

Postbus 8034, 1180 LA Amstelveen, The Netherlands

Tel: (31) 20 6418405

Toll Free in benelux: 0 800 0993344

e-mail: [email protected]

Czech Republic:

France:

Germany/Austria:

United Kingdom:

ISO 9002 Certified

United Kingdom:

ISO 9002 Certified

One Omega Drive, River Bend Technology Centre,

Northbank, Irlam, Manchester M44 5EX, England

Tel: 44 (161) 777-7711

Toll Free in England: 0800-488-488

e-mail: [email protected]

One Omega Drive, River Bend Technology Centre,

Northbank, Irlam, Manchester M44 5EX, England

Tel: 44 (161) 777-7711

Toll Free in England: 0800-488-488

e-mail: [email protected]

Daimlerstrasse 26, D-85392 Deckenpfronn, Germany

Tel: 49 (07056) 3017

Toll Free in German: 0130 11 21 66

e-mail: [email protected]

Daimlerstrasse 26, D-85392 Deckenpfronn, Germany

Tel: 49 (07056) 3017

Toll Free in German: 0130 11 21 66

e-mail: [email protected]

9 rue Denis Papin, 78190 Trappes

Tel: (33) 130-621-400

Toll Free in France: 0800-4-06342

e-mail: [email protected]

9 rue Denis Papin, 78190 Trappes

Tel: (33) 130-621-400

Toll Free in France: 0800-4-06342

e-mail: [email protected]

ul. Rude armady 1868, 73301 Karvina-Hranice

Tel: 420 (69) 6311899

Toll Free: 0800-1-66342

ul. Rude armady 1868, 73301 Karvina-Hranice

Tel: 420 (69) 6311899

Toll Free: 0800-1-66342

Sales Service:1-800-826-6342 / 1-800-TC-OMEGA

Customer Service: 1-800-622-2378 / 1-800-622-BEST

Engineering Service: 1-800-872-9436/1-800-USA-WHEN

TELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA

Sales Service:1-800-826-6342 / 1-800-TC-OMEGA

Customer Service: 1-800-622-2378 / 1-800-622-BEST

Engineering Service: 1-800-872-9436/1-800-USA-WHEN

TELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA

Tel: (95) 800-826-6342

En Español: (95) 203-359-7803

Tel: (95) 800-826-6342

En Español: (95) 203-359-7803

FAX: (95) 203-359-89-8

Email: [email protected]

FAX: (95) 203-359-89-8

Email: [email protected]

FAX: (31) 20 6434643

FAX: 420 (69) 6311114

Email: [email protected]

FAX: 420 (69) 6311114

Email: [email protected]

FAX: (33) 130-699-120

FAX: 49 (07056) 8540

FAX: 44 (161) 777-6622

976 Bergar

Laval (Quebec) H7L 5A2

Tel: (514) 856-6928

e-mail: [email protected]

976 Bergar

Laval (Quebec) H7L 5A2

Tel: (514) 856-6928

e-mail: [email protected]

One Omega Drive, Box 4047

Stamford, CT 06907-0047

Tel: (203) 359-1660

e-mail: [email protected]

One Omega Drive, Box 4047

Stamford, CT 06907-0047

Tel: (203) 359-1660

e-mail: [email protected]

FAX: (203) 359-7700

FAX: (514) 856 6886

omega.com

Advertising

Popular Brands

Popular manuals