Model 990 rear panel – Outlaw Audio 990 User Manual
Page 8
8
Outlaw Audio
Owner’s Manual
9
Model 990 7.1 Channel Preamp/Processor
Owner’s Manual
Model 990 Rear Panel
1
Component video inputs (see pages 16, 20)
Use these three sets of jacks to connect devices with component video
outputs, such as a DVD player or a digital TV tuner. If the device has a DVI
or HDMI output, use that connection instead.
2
Optical digital audio inputs (see pages 14, 15)
Use these inputs to connect digital audio devices such as DVD players, CD
players, and digital TV tuners. These inputs are assignable to any video
or audio source.
3
USB connector (see page 20)
This connector carries digital audio from any USB-equipped computer.
Like the RS-232 connector, it can be used to upload new software into the
Model 990. This input is assignable to any video or audio source.
4
Component video output (see pages 16, 21)
Use this output to connect to a video display that accepts component video.
5
USB OPR/SVC switch
In normal operation, leave this switch in the OPR (up) position to have
the USB jack serve as an input. Use the SVC (down) position only when
upgrading the system software.
6
RS-232 port (see page 23)
This connector can be used either for control of the Model 990 by a touch-
screen, such as an AMX or Crestron, or for uploading new software into
the Model 990.
7
Zone 2 audio/video output (see page 22)
Use these jacks to feed stereo analog audio and composite video or S-Video
to a video display and an audio system in a second zone.
8
Composite video output (see pages 16, 21)
Connect this output to the composite video input of your video display.
Use this only if the display does not have an S-Video or component
video input.
9
S-Video output (see pages 16, 21)
Connect this output to the S-Video input of your video display. Use this only
if the display does not have a component video input.
Model 990 Rear Panel
Model 990 Rear Panel
1
3
6
7
2
12
28
29
27
24
22
20
18
8
4
10 11
9
19
25
23
13
14
15
16
17
30
31
26
5
21