Direct interface to universal relay module – Omega Speaker Systems DPS3301 User Manual

Page 22

Advertising
background image


DIRECT INTERFACE TO UNIVERSAL RELAY MODULE

For high amperage loads, DPS3300 series units can be used in conjunction with Universal Relay Module
(Model RELAY-URM400/800) which provide up to eight 15 ampere relays. Both open collector and relay
models can be interfaced directly to RELAY-URM400/800 units.


Page

22

RELAY-URM400/800 series relay module is a very versatile instrument that is used for switching up to eight
15 ampere loads. In addition to the DPS3300 direct interface, RELAY-URM400/800 series relay module
accepts low level input signals from PLCs, process controllers, indicators, motor starters, etc. Selectable input
allows activation of output relays on direct acting or reverse acting signal. In addition to working with
control/logic level signals, another very useful feature of RELAY-URM400/800 is activation of output relays
on contact closure. The use of the RELAY-URM400/800 allows heavy loads requiring up to 15 amps to be
controlled by the DPS3300 with minimal equipment & wiring.

Input and output connections for the RELAY-URM400/800 are made through euro style pluggable connectors
which are conveniently located on the top and bottom of the unit. Screw in terminals allow for quick
connect/disconnect of wires. The unit is housed in a versatile enclosure that can be configured for mounting on
a DIN rail or on a wall. If desired, the same enclosure can be panel mounted with relay, AC and DC supply
status visible on the front. LEDs on the front panel turn on when a relay is energized. Two different versions are
offered in this series. First one is RELAY-URM400 that has four relay outputs. The second one is RELAY-
URM800 that has eight relay outputs. (Future versions will also include 4-15A solid state relays). Both units
come with a built-in universal power supply. It operates from 100vac to 240vac. This power supply provides
power not only to the internal electronics and relays but has up to 20watts (5vdc) available for external
applications by the user.

Direct Interface to

Relay-URM 400/800

DPS3301 TERMINAL COMPARTMENT

Advertising