Oki C610 - Manual (Page 41)

41 – C610/C711 User’s Guide
Print
Setup
(cont.) Toner Save
Mode
On/Off This function works effectively
only if the data input is color RGB
data. This setting is valid in PS
and PCL, but does not take effect
in the following cases.
(1) PS: If Color Matching is set
OFF.
(2) PS: If any setting other than
ASIC Color Matching is set.
(3) PS: CMYK data when Ink
Simulation Mode is used (valid in
any other cases except Case (1)
and Case (2) above as long as
data is RGB).
(4) PCL binary data (Color/
Monochrome).
Mono-Print
Speed
Auto
Color Speed
Normal Speed Sets the monochrome print
speed. Prints at the most
appropriate speed for page
process if Auto is set.
Prints always at the color print
speed if Color is set.
Prints always at the monochrome
print speed if Normal is set.
Default
Orientation
Portrait
Landscape Specifies print orientation.
Not valid for PS (valid only for
PCL/ IBMPPR/EPSONFX/ HP-
GL2).
Form
Length 5 lines
~
64 lines
~
128 lines Sets the number of lines that can
be printed on a page
Not valid for PS (valid only for
PCL/HP-GL2).
Default values listed to the left
are for Letter/A4. In practice,
however, they change according
to the size of paper loaded in the
tray.
ITEM SETTINGS EXPLANATION