Oki C610 - Manual (Page 52)

52 – C610/C711 User’s Guide
SD Card
Setup
(cont.) Resize
Partition PCL nn%/
Common mm%/
PSll%/<Apply> Specifies the size of partition.
Specifies a size by ratio to the
whole SD Card in % (1% unit).
nn,mm,ll: 1 - 98 and
nn+mm+ll=100
The sizes are displayed in the
partition list and can be changed
by selecting the partition size to
be changed. If Apply is selected,
the following confirmation
message appears.
Are You Sure? Yes/No
No = return to the previous
menu.
Yes = Execute Now? Yes/No
No = return to the previous
menu. The request is put into the
memory and the SD Card
initialization and partition size
change will be executed at next
power cycle.
Yes = shutdown. SD Card
initialization and partition size
change will be executed at Power
Off/On cycle. (If one partition
size is modified, the others are
also modified.) If any partition
size is modified, Initialization of
SD Card needs to be executed as
well.
If a previously used SD Card is
installed, SD Card initialization
also takes place. If an SD Card,
which has been used before, is
installed, the layout of this menu
may be different from that of
each partition. (The previously
used layout will be displayed.)
ITEM SETTINGS EXPLANATION