Sylvania 6900DTE - Manual (Page 14)

14
EN
1A23
TV/Monitor Connections
There are various ways of connecting the STB to a TV or monitor. Connect according to your equipment and
screen format. The following pages show some sample connections.
• Choose one type of video connection (unless you also want to connect a recording device).
• When changing connections, turn all devices off.
• Refer to each owner’s manual for further information on other devices.
• After connecting the TV or monitor, choose the type of audio connection you want.
D. AU D I O O U T
C O A X .
L P b
P r
L
R
1 2
Y C V B S
O U T
C O M P.
O U T
A N T.
C T L
D. AU D I O
O U T DV I COMP.
DV I - D H D C P O U T OPT
S - V I D E O
O U T
RESOLUTION
SELECT
1 0 8 0 i / 7 2 0 p / 4 8 0 p
A N T. I N
AU D I O O U T
Rear panel of STB
DVI video cable
To the DVI input jack
NOTE:
DVI video cable is not included.
RESOLUTION SELECT switch (1080i/720p/480p)
See your television’s manual for details on the resolutions it can handle.
Position of RESOLUTION SELECT switch
Select 1080i if your television can show 1080i resolution video.
Select 720p if your television can show 720p resolution video.
Select 480p if your television can show 480p resolution video.
1080i
720p
480p
TV resolution
Output selection switch (DVI, COMP.)
See your television’s manual for details on the types of jacks it has.
Position of output selection switch
Switch to DVI. The STB outputs video through the DVI-D HDCP OUT jack,
at the resolution you select with the RESOLUTION SELECT switch.
e.g.: Connection to HDTV
1 0 8 0 i / 7 2 0 p / 4 8 0 p
1 0 8 0 i / 7 2 0 p / 4 8 0 p
1 0 8 0 i / 7 2 0 p / 4 8 0 p
DV I COMP.
STB connection using DVI-D HDCP OUT jack to HDTV
ST300UA.qxd 04.8.3 1:12 PM Page 14