Advanced operation, 1 press setup to display setup menu, 2 select display using navigation buttons – Sylvania 6900DTE User Manual

Page 42: Then press enter, 3 select display mode using navigation buttons, 5 press setup to exit setup menu, Stb 4:3 tv, Stb 16:9 tv, Display mode

Advertising
background image

1 Press SETUP to display SETUP menu.

Screen:

Remote:

2 Select DISPLAY using navigation

buttons

o

o

/ p

p

, then press ENTER.

DISPLAY menu appears.

3 Select DISPLAY MODE using navigation

buttons

o

o

/ p

p

, then press ENTER.

Display mode options appear.

4 Select the desired display mode using

navigation buttons

o

o

/ p

p

, then press

ENTER.

The display mode is set.

NOTE:

Choose the display mode as you prefer.
See “INFORMATION on Screen Ratio and Display
Mode” on page 43 for further information.

5 Press SETUP to exit SETUP menu.

CAUTION:

If the TV is left in LETTERBOX or SIDEBAR for
a long period of time, the still image may cause a
burn-ing effect, damaging the TV screen.

appears because of TV settings.

appears because of STB settings.

STB

4:3 TV

1080i video
output signal

appears because of TV settings.

appears because of STB settings.

STB

16:9 TV

480p video
output signal

Depending on the type of TV you have, you
may encounter one of the following problems.

4:3 TV
If you have a 4:3 aspect HDTV, bars may appear
at the top and bottom of the picture when you
input 1080i signals. If you have set the STB to
SCREEN RATIO 16:9 and SIDEBAR, the
screen may appear as shown here.

We recommend setting the STB’s screen ratio to
4:3 and the display mode to suit your preference.
Alternatively, set the resolution selection switch
on the rear panel to “480p”. See your TV
owner’s manual for details.

16:9 TV
A double set of sidebars may appear on the left
and right of the picture, squeezing it into the
center of the screen. This can occur if you have
set the resolution selection switch on the rear
panel to “480p”, because the television may
recognize the signal as 4:3, regardless of the
screen ratio setting you have made on the STB.

If your television can handle 1080i or 720p
signals, set the resolution selection switch on the
rear panel to the resolution for your television. If
it cannot handle either of these, then change the
display mode on your television.

Important information about

screen ratio and display mode

DISPLAY

QUIT

CHANNEL

DISPLAY

CLOCK

DETAIL

SCREEN RATIO

16:9

DISPLAY MODE

SIDEBAR

DISPLAY

QUIT

CHANNEL

DISPLAY

CLOCK

DETAIL

SCREEN

DISPLAY

Select display mode.

SIDEBAR

ZOOM

FULL

DISPLAY

QUIT

CHANNEL

DISPLAY

CLOCK

DETAIL

SCREEN RATIO

16:9

DISPLAY MODE

SIDEBAR

SETUP

QUIT

CHANNEL

DISPLAY

CLOCK

DETAIL

DISPLAY MODE

42

EN

1A23

Advanced Operation

ST300UA.qxd 04.8.3 1:12 PM Page 42

Advertising