Sylvania 6900DTE - Manual (Page 39)

5 Adjust the Smart Antenna’s height (or
direction if you are using an ordinary
antenna) to get the best reception.
• A status bar stretches to the right according to the
signal strength.
• The value will be indicated on the left of the status bar
so that you can adjust the antenna.
NOTE :
Once you have correctly installed the Smart
Antenna, you do not have to adjust its height or
position again.
To adjust other channels:
Select the channel with CH
o / p buttons, then adjust it.
To cancel during adjustment:
Press SETUP or ENTER.
6 Press SETUP to exit SETUP menu.
STB can get available digital channels automatically.
AUTOSCAN receives available digital channels and
stores them in a channel map. These channels can
then be selected using CH
o / p buttons.
CAUTION:
If AUTOSCAN is skipped, digital channels may not
be received correctly.
NOTE:
To get many more digital channels from your Smart
Antenna, do the EXTENDED SCAN. This enables
you to receive many more digital channels than
AUTOSCAN. It takes about 20 minutes.
SETUP
ENTER
CH /
Navigation
buttons /
AUTOSCAN
Receiving channels
ANTENNA
QUIT
CHANNEL
DISPLAY
CLOCK
DETAIL
26-1
WEAK STRONG
PREVIOUS
NOW
75
PEAK
75
Current value Peak value
39
EN
1A23
Advanced Operation
7 Ad
v
anced
Operation
ST300UA.qxd 04.8.3 1:12 PM Page 39