Omega Vehicle Security DAQ-16 - Manual (Page 22)

2.8 Interrupts
The DAQ-16 is capable of generating an interrupt from one of four sources:
1. End of conversion signal
2. DMA terminal count
3. Multi-function timer output
4. External interrupt input
The interrupt source is software selected through the DAQ-16 control word register. The
interrupt level is selected using the jumpers J10 and J11 as shown in Figure 2-11.
IR
Q
11
IR
Q
14
IR
Q
15
IR
Q
12
IR
Q
10
IR
Q
2
IR
Q
3
IR
Q
4
IR
Q
5
IR
Q
6
IR
Q
7
J11 J10
Factory default = IRQ 5
Figure 2-11. Jumpers J10 and J11 Configuration
2.8.1 External Interrupt
The external interrupt is a TTL compatible input from the D-62 connector. An interrupt
request is generated on a high to low transition of this input.
DAQ-16 Users Manual 22