Olympus E-100 - Manual (Page 9)

PLAYBACK
E-108
IMPORTANT!
• Auto Power Off (page E-38) is disabled whenever
Slide Show is being used. This means you should not
leave Slide Show running when using batteries to
power the camera. Doing so can rundown batteries.
Be sure to stop Slide Show and turn off the camera
after you are finished.
• Note that all buttons are disabled while an image
change is in progress. Wait until an image is stopped
on the monitor screen before performing a button op-
eration, or hold down the button until the image stops.
• Images copied from another digital camera or a com-
puter may take longer time to appear than the Slide
Show interval time you select.
Resizing an Image
You can use the following procedure to change an image to
VGA size (640 x 480 pixels).
• VGA is the optimum image size for attachment to e-mail
messages or incorporation into Web pages.
1. Align the POWER/Function Switch with PLAY.
2. Use [ ̈ ] and [ ̇ ] to display the image you want
to resize.
3. Press / /MF RESIZE.
4. In response to the confirmation message that
appears, use [
̄
] and [
̆
] to select “Yes”.
• Select “No” to exit the procedure without resizing the
image.
5. Press SET/DISP.
IMPORTANT!
• The resized version of the image is saved as a new file.
• The original, pre-resized image is also retained in memory.
• Images smaller than 640 x 480 pixels cannot be resized.
• Movie Mode, Panorama Mode, and TIFF (uncompressed)
images cannot be resized.
• Resizing of an image cannot proceed if the message
“MEMORY FULL Delete unneeded images” appears
during the above procedure.