Omega Vehicle Security TCIC - Manual (Page 15)

TCIC User’s Manual
13
3. TCIC-Monitor
The TCIC-Monitor utility is an initial setup tool and a smart data
logger package for monitoring & collecting readings in high
speed, including graphic mode display. The TCIC-Monitor works
with both driver types (refer to section 1 - Main Features /
Communication). It detects which driver type (direct or VCP) is
installed and communicates with the card(s) using that driver
(the type of the driver detected is reported in the title). More
than one TCIC board may be connected to the PC while using
the TCIC-Monitor; the user should select the required board. It
is legitimate to run the TCIC-Monitor twice (or more) selecting
each time another free board. Likewise, when no free board is
detected, the TCIC-Monitor lets the user to work in ‘Demo’
mode.
Note: The TCIC-Monitor was developed under ‘.NET’ (dot NET) , so
it requires the ‘dotnet framework’ V1.1.4322 in order to run. The
setup for this ‘dotnet framework’ is available free via Microsoft site;
however, to facilitate the process, it is included in the attached
CD-ROM (named dotnetfxV1.1.4322.exe).