Tcic user’s manual – Omega Vehicle Security TCIC User Manual
Page 22
TCIC User’s Manual
20
Sampling Rate:
Max. / 0.5 Sec. / ... seconds
The Sampling Rate defines the frequency in which readings
are refreshed on the display.
There are three options:
• Max. –
Maximal rate that the card can support.
• 0.5 Sec. –
One refresh each 0.5 sec.
• ... seconds – One refresh each x seconds, where x is
user-defined. x should be at least 0.5 and
at most 1000.
Channel Settings
The following are individual settings for each channel:
Channel Name:
...
The user may assign a name to each channel.
This name is displayed as ‘Channel Title’ (refer to
section 3.5.1), giving the user more control on his
system.
Input Limits
The Input Limits (Min. & Max.) define the expected
temperature (or mV) range. The low & high limits on the
analog display and on graph’s vertical axis (temp.) will be
based on Min. & Max. (usually, the range of the analog
display will be somewhat wider).
Min.:
...
Minimal expected temperature.
Max.:
...
Maximal expected temperature.