Omega Vehicle Security TCIC - Manual (Page 25)

TCIC User’s Manual
23
3.4 "Save to File" Command ('Start' or 'Stop')
The "Save to File" function enables recording card’s readings in a
text file.
Upon clicking "Start Save to File" the program suggests an
automatic file name, based on the current time & date. Either
accept this suggested name, or change it; then click ‘Save’. The
recording operation goes on until you press the same button again
("Stop Save to File"), or exit the TCIC-Monitor.
The readings files reside in the subfolder TCIC_Readings under the
installation folder, for example:
C:\Program Files\IMS\TCIC-MONITOR\TCIC_Readings
3.5 Channel Boxes
3.5.1 Channel Title
Displays the Channel Name (refer to section 3.2.2.2).
3.5.2 Digital Display
Displays current channel’s reading.
Reading’s unit is ºC, ºF or mV, according to user’s setting
of Temperature Unit and the specific channel’s Input Type
(see section 3.2.2.1).
3.5.3 Analog Display
Displays the same reading as in the Digital Display, in an analog
form. The limits of the meter are based on the Input Limits (refer
to section 3.2.2.2).
3.5.4 Channel Description
Displays card’s Channel Settings (section 3.2.2.1).
3.5.5 "Show Graph" Command
Displays current channel in a graph. Graph’s display may be resized
dragging its edge or corner, as customary in Windows, or magnified
using the Maximize button.