Oregon Scientific Body Fat Monitor with Wireless Remote Display GR101 - Manual (Page 13)

Safety and Care
CARING FOR YOUR BODY FAT
MONITOR
To ensure you receive the maximum
benefit from using this product, please
observe the following guidelines.
Clean with a damp cloth. Do
not use abrasive or corrosive
cleaning agents.
Do not attempt to repair the
product yourself. Contact
the dealer or a qualified
repairman if the product
requires servicing.
Do not store the Scale in an
upright position.
Do not place objects on the
Scale or Remote Monitor.
Do not expose the product
to excessive force, dust,
temperature fluctuations, or
humidity.
Allow the Scale to settle for
at least 30 minutes whenever
there is a sudden change in
ambient environment (e.g.,
from an outdoor area to an
air conditioned room).
SAFETY PRECAUTIONS
Please observe the following safety
precautions when setting up and using
your Body Fat Monitor.
Do not immerse the product
in water or place the scale on
a wet surface.
Keep the product away
from heat sources such
as radiators, stoves, and
heaters.
Do not use the Scale on an
uneven surface.
Use carpet feet (supplied)
if you place the Scale on a
carpet.
Warnings
This product has been engineered and
manufactured to the highest safety
standards. The product is designed to
provide you with many years of reliable
service, provided that it is properly used
and cared for. To ensure your safety and
prolong the life of the product, please
observe the following precautions.
ABOUT THE DEVICE
WARNING: It is not
recommended for persons
with implanted medical
equipment such as
pacemakers or pregnant
women to use the GR101.
• The GR101 is intended for
home use only, not for hospital
diagnosis purposes.
• The BMI, Body Fat Percentage,
and Body Water measurements
done with the GR101
should only be treated as an
approximate indication of your
health level. Consult with your
physician for a full and thorough
evaluation.
!