Oregon Scientific Body Fat Monitor with Wireless Remote Display GR101 User Manual
Page 4
Press ▲ / ▼ to adjust the
values of each setting. Press
SET to
confirm.
GUEST MODE
The Guest Mode is for users without a
User Profile set up. You can measure
your weight and BMI in this mode.
1. Press
Guest/Weight. Once the
Reception icon
blinks and the
Scale’s LED Indicator is blank, the
Remote Monitor is ready to receive
3. Once the green LED stops blinking,
the Remote Monitor will prompt you
for:
a.
Gender: Male /
Female
b. Birth Month
c. Birth Year icon appears
d. Height:
•
In centimetre (cm) if kg
(kilogram) weight unit was
selected.
•
In feet and inches if lb
(pound) or st-lb (stone)
weight unit was selected.
2. Follow Steps 3 and 4 of the
USER
PROFILE MEASUREMENTS
section.
You can choose to skip the
next set of instructions if you do not
want to measure your Body Fat and
Body Water levels.
Press ▲ / ▼ to adjust the
values of each setting. Press
SET to
confirm.
4. When completed, your Body Fat and
Body Water measurements will be
alternately displayed on the Remote
Monitor.
User Profile
SETTING USER PROFILE
With this product, you can set and store
the age, gender, and height for up to four
people (User 1 to 4) who regularly use the
Body Fat Monitor.
If the batteries are low, you cannot
store the height and age to memory.
1. On the Remote Monitor, each user is
represented by one of the four User
Switches. Press 1, 2, 3, or 4 to select
a user.
Make sure not to store your
height and birth date over someone
else’s existing profile.
2. Once the green LED stops blinking,
the Remote Monitor will prompt you
for:
a.
Gender: Male /
Female
b. Birth Month
c. Birth Year icon appears