Onkyo HT-S5200 - Manual (Page 31)

31
Connecting the AV receiver
—Continued
Notes:
• The AV receiver must be turned on for recording. Recording is not possible while it’s on Standby.
• If you want to record directly from your TV or another video source without going through the AV receiver, connect
the audio and video outputs from your TV or other video component directly to the recording VCR/DVR’s audio and
video inputs. See the manuals supplied with your TV or VCR/DVR for details.
• Video signals connected to composite video inputs can only be recorded via the VCR/DVR OUT V jack. So if your
source TV or VCR is connected to a composite video input, the recording VCR/DVR must be connected to the
VCR/DVR OUT V jack.
Connecting a VCR or DVR for Recording
Connection AV receiver Signal flow VCR or DVD recorder
VCR/DVR OUT V ⇒ Composite video input
VCR/DVR OUT L/R
⇒
Audio L/R input
Step 1: Video Connection
Make the video connection
. A
Step 2: Audio Connection
Make the audio connection
. a
A
a
AUDIO
IN
VIDEO
IN
L R
C a A
VCR or DVR
HT-S5200_En.book 31 ページ ２００９年３月９日 月曜日 午後４時３１分