Onkyo HT-S5200 - Manual (Page 73)

73
Advanced Setup
—Continued
With the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like.
Audio Adjust Settings
7. Audio Adjust
Multiplex/Mono Settings
Input (Mux) Main: The main channel is output (default).
Sub: The sub channel is output.
M/S: Both the main and sub channels are output.
This setting determines which channel of a stereo multiplex source is output. Use it to select audio channels or
languages with multiplex sources, multilingual TV broadcasts, and so on.
Input (Mono) L+R: Both the left and right channels are output (default).
L: Only the left channel is output.
R: Only the right channel is output.
This setting determines which channel is output when the Mono listening mode is used with a stereo source.
PLIIx/Neo:6 Music Mode Settings
■ PLIIx Music (2ch Input)
These settings provide for playing any 2-channel digital source such as Dolby Digital, or 2-channel analog/PCM
source in the Dolby PLIIx Music listening mode.
Panorama On: Panorama function on.
Off: Panorama function off (default).
With this function, you can broaden the width of the front stereo image when using the Dolby Pro Logic II Music
or Dolby Pro Logic IIx Music listening mode.
Dimension –3 to +3 (default: 0)
With this setting, you can move the sound field forward or backward when using the Dolby Pro Logic II Music
or Dolby Pro Logic IIx Music listening mode. Lower settings move the sound field forward. Higher settings
move it backward.
If the stereo image feels too wide, or there is too much surround sound, move the sound field forward to improve
the balance. Conversely, if the stereo image feels like it is in mono, or there is not enough surround sound, move
it backward.
Center Width 0 to 7 (default: 3)
from the center speaker when using the Dolby Pro Logic II Music or Dolby Pro Logic IIx Music listening mode.
Normally, if you are using a center speaker, the center channel sound is output by only the center speaker. (If you
are not using a center speaker, the center channel sound will be distributed to the front left and right speakers to
create a phantom center.) This setting controls the front left, right, and center mix, allowing you to adjust the
weight of the center channel sound.
■ Neo:6 Music
Center Image 0 to 5 (default: 2)
The DTS Neo:6 Music listening mode creates 6-channel surround sound from 2-channel (stereo) sources. With
this setting, you can specify by how much the front left and right channel output is attenuated in order to create
the center channel. This setting is unavailable if no surround speakers are connected.
Setting a value [0] in the middle is set to hear a sound. Sound is spread in left and right (the outside) so that the
set value is made big. Please adjust by liking.
HT-S5200_En.book 73 ページ ２００９年３月９日 月曜日 午後４時３１分