Omron V400-H111 - Manual (Page 16)

15
V400-H111/211
User’s Manual
Se
ct
io
n 1
Opera
tion Ov
erv
iew
Section 1
Product Overview
Operation Overview
Installation and Connections Section 2 p.17
Prepare the required components and connect them.
Main Peripheral Devices
• Cable
• Power supply device
• Contactor
Reading 2D Code Section 3 p.35
Turn ON the power and press the trigger buttons to
read the code.
• Reading method
• Field of view setting
• Display details
System Settings Section 4 p.43
Basically, no settings are required. However, in
the following cases, the settings may need to be
changed using the Setup window of the Code
Reader or the special tool [2DCR Configear].
• To change the communication
conditions (See note.)
• To use various functions
If [2DCR Configear] is used, the changes you
have made will be reflected to the Code Reader using the Memory Card or the
communication function of [2DCR Configear].
*1 The default settings are as follows: Baud rate: 9,600 bps; Parity: None;
Data length: 8 bits; Stop bits: 1 bit