Omron V400-H111 - Manual (Page 65)

64
Section 4
Crea
ting Set
ting Files Using t
h
e 2DCR Conf
ig
ear
V400-H111/211
User’s Manual
Section 4
System Settings
Communication Settings
The settings shown in the following table are set in the [Communication Settings] tab
Page in the Create Setting Data Window.
The default settings are indicated with an asterisk.
The format when FCS is ON is as follows:
For details on FCS calculation methods, refer to FCS Calculation Method.
p.85
Setting item Settings
Baud Rate 9,600 * , 19,200, or 38,400
Parity None * , odd, or even
Data Length 77 bits or 8 bits *
Stop Bit 1 bit * or 2 bits
Header/Footer Prefix None*, 02 <STX>, or 1B <ESC>
Suffix ETX, 0A LF, 0D CR * , or 0D0A CR+LF
FCS ON or OFF *