Omron V400-H111 - Manual (Page 38)

37
V400-H111/211
User’s Manual
Sect
ion 3
Startup
Section 3
Reading 2D Code
Startup
When using a cable type, V400-W21-2M/5M, V400-W20-2M/5M, turn ON the switch
located on the power supply. When using a cable type, V400-W22-2M/5M, the AC
adaptor must be plugged into an AC outlet.
When the power is turned ON, the window on
the right will be displayed, the power indicator
will light up, and the buzzer will sound.
■ Buzzer
The buzzer will sound under the following
conditions.
• When starting the V400
• When reading is successful
• When operating in setting mode
When the buzzer is set to OFF, the buzzer will not sound for any operation.