Omron V400-H111 - Manual (Page 37)

36
Sect
ion 3
Ba
si
c O
p
era
tio
n
V400-H111/211
User’s Manual
Section 3
Reading 2D Code
Basic Operation
Startup p.37
Turn ON the power and start the Handheld 2D Code Reader.
Reading 2D Code p.38
Press the trigger buttons and keep pressed while
moving the Handheld 2D Code Reader close to the
2D code.
Outputting Results p.39
The read data is output to the monitor and RS-232C
communications.
If no operation is performed during a fixed interval, the Handheld 2D Code Reader will enter a sleep state.
Pressing the trigger buttons will release the sleep state.
Functions p.42
The following functions are provided with the Handheld 2D Code Reader.
• Sleep
• Data Conversion on Display
• Data Accumulation