Olivetti 2701 - Manual (Page 37)

35
3
Chapter 3
CONVENIENT COPY FUNCTIONS
This chapter explains special finishing functions and other convenient functions.
COPY FINISHING FUNCTIONS
This section explains the sort, group, and offset functions, as well as the staple sort function which is used to staple
output collated with the sort function when a finisher is installed.
SORT COPY
This function is used to collate sets of copies. The
copies are delivered to the centre tray, and to other
trays when a job separator tray or finisher is installed.
GROUP COPY
This function is used to group sets of copies by page.
The copies are delivered to the centre tray, and to
other trays when a job separator tray or finisher is
installed.
OFFSET FUNCTION
Each set of copies is offset from the previous set in the
output tray, making it easy to distinguish one set from
another. (The offset function can be used in the centre
tray or in the offset tray of the finisher.)
Enabling the offset function
The offset function operates when a checkmark
appears in the [OFFSET] checkbox, which is displayed
by touching the [OUTPUT] key. (If a checkmark
doesn't appear, touch the checkbox.)
2
1
3
2
1
3
1
2
3
2
1
3
3
3
3
2
2
2
1
2
3
1
1
1
Offset function "ON" Offset function "OFF"