P.70) – Olivetti 2701 User Manual

Page 74

Advertising
background image

70

TROUBLESHOOTING AND MAINTENANCE

MISFEED IN THE UPPER EXIT AREA
(when a job separator tray kit or finisher (AR-FN5N) is
installed)

If a job separator tray kit or a finisher is installed, a misfeed may occur in the upper exit area.

1

Open the upper right side cover.

2

Gently pull the misfed paper out.

Be careful not to tear the
misfed paper during
removal.

3

Close the upper right side cover.

Make sure that the misfeed message is cleared.

MISFEED IN AN OUTPUT TRAY
(when a finisher (AR-FN5N) is installed)

1

Grasp the handle of the stapler
compiler cover and pull to open the
cover.

2

Remove any misfed paper from the
transport area.

A MISFEED HAS OCCURRED.

INFORMATION

Advertising
This manual is related to the following products: