Olivetti 2701 - Manual (Page 95)

79n
■ Misfeed in the saddle stitch finisher
1 Press the detach button and separate
the saddle stitch finisher from the
machine.
2 Remove any misfed paper from the
machine.
3 If there was no misfed paper in step 2,
pull roller rotating knob B on the
punch unit toward you and rotate it.
(Only when an optional punch unit is
installed.)
Rotating roller rotating
knob B releases the
caught paper.
4 Open the top cover.
5 Remove the misfed paper.
Remove the paper
gently, taking care not to
tear it.
6 Close the top cover.
7 Remove any misfed paper from the
stapler compiler.
Remove the paper
gently, taking care not to
tear it.
8 Open the cover of the saddle stitch
section.
9 Remove the misfed paper.
Remove the paper
gently, taking care not to
tear it.
The saddle stitch finisher and the
machine are connected at the rear.
Exercise caution when pulling them
apart.
Caution
Roller rotating
knob B
AR-F14.book 12 ページ ２００４年２月１７日 火曜日 午後３時５７分