Olivetti 2701 - Manual (Page 84)

79a
SADDLE STITCH FINISHER
The saddle stitch finisher features the offset function, which makes it easy to distinguish sets of output, and the
saddle stitch (pamphlet) function, which automatically staples and folds output down the center. An optional punch
unit can also be installed to punch holes in output.
PARTS OF THE SADDLE STITCH FINISHER
• Do not press down on or place heavy objects on the saddle stitch finisher (or on its trays in
particular).
• During output to the offset tray, the offset tray may move up and down.
Display screens, messages, and key names shown in this manual may differ from the actual screens, messages,
and key names due to modifications made for improvement.
This operation manual is described based on the American spelling standard.
Stapler section
Open the front cover and
pull out this section to
replace the staple
cartridge or remove a
staple jam.
Stapler compiler
Paper to be stapled is
temporarily stacked here.
Offset tray
This tray is used for the offset
function and the staple function.
Saddle stitch tray
Saddle stitch output
is delivered to this tray.
Front cover
Open this cover to replace the
staple cartridge or remove a
staple jam.
Top cover
Open this cover to remove a paper misfeed.
Center cover
Paper moves through
here when output to the
saddle stitch finisher.
Detach button
Press this button when a
paper misfeed or other
problem occurs to
detach the saddle stitch
finisher from the
machine.
Caution
AR-F14.book 1 ページ ２００４年２月１７日 火曜日 午後３時５７分