Ohlins CANNONDALE FG 9910 - Manual (Page 13)

13
Technical specifications
Rebound and compression adjustment
Refer to mounting instruction for set-up data.
Maximum open rebound and compression valve: 20 clicks.
Free Spring Length:
All forks: 467 mm (service limit 460 mm).
Spring preload:
Maximum allowed adjustment
range 3-13 mm (with washers).
Spring rate:
All forks: 2328-45: 4,5 N/mm.
Optional spring rate:
2328-39: 3,9 N/mm.
2328-41: 4,1 N/mm
2328-43: 4,3 N/mm
2328-45: 4,5 N/mm.
2328-47: 4,7 N/mm
Oil level:
See mounting instruction for recommended oil level.
Adjustment range 90-130 mm.
CAUTION!
Use only Öhlins high performance front
fork fluid No. 5 (1305-01).
Loctite glue:
542 for fork bottom thread and cartridge top lid.
Tighten torque:
Triple clamp bolt: See your bike's work shop manual.
Compression valve: 45 Nm (Base valve).
Cylinder tube lid (cartridgetube): 40 Nm
Compression valve, 8 mm nut 8 Nm.
Rebound valve, 8 mm nut 8 Nm.
Grease:
Öhlins Front Fork grease 148-01
(Green grease).
Service Intervals:
Every 20 hours.
Service tools
Pos. Part No. Description
1 1799-02 Bushing/seal mounting tool
2 0786-03 Inner tube tool
3 1797-01 Tool-cylinder tube lid
4 0787-03 Cylinder tube tool (cartridge)
5 1702-02 Bushing remover tool
1
2
3
4
5