Ohlins CANNONDALE FG 9910 - Manual (Page 8)

8
Preload adjustment
Put the bike on a stand and
loosen the screws in the fork
top crown that hold the fork
legs.
NOTE
On most MX-bikes you have to
take of the handle bar before
you can unscrew the top cap.
Unscrew the top cap, use a 24
mm wrench.
a
b
Put a box under the front wheel
so that the springs are visible.
Loosen the top cap from
damper rod extender and re-
move it.
Remove the spring support.
Install a new preload spacer to
achieve the right static sag.
Fit the spring support, top cap
and the handle bar.
Tighten all screws.
For tightening torques, please
see your bike's work shop
manual.
c
a
b
c