OxiBrands 1/4" 18 Gauge Crown Air Stapler 68018 User Manual
Page 12
Page 12
For technical questions, please call 1-800-444-3353.
SKU 68018
4. To fire, open the shut-off valve, place
the Safety against the workpiece. The
Stapler should not fire if the nose is not
depressed. Once depressed, gently and
briefly squeeze the Trigger once.
Do not
fire repeatedly. Staples could bounce
off of one another, damaging the work
piece or causing PERSONAL INJURY.
5. Adjust position of the Air Deflector (3) to
direct exhaust away from yourself.
6. If the tool requires more force to
accomplish the task, verify that the
tool receives sufficient, unobstructed
airflow (CFM) and increase the pressure
(PSI) output of the regulator up to the
maximum air pressure rating of this tool.
CAUTION! TO PREVENT TOOL AND
ACCESSORY FAILURE, RESULTING
IN INJURY: Do not exceed the tool’s
maximum air pressure rating. If the
tool still does not have sufficient force at
maximum pressure and sufficient airflow,
then a larger tool may be required.
7.
After use, to prevent accidents:
a.
Release the Trigger.
b.
Detach the air supply.
c.
Attempt to fire the Tool into a piece
of scrap wood to ensure that it is
disconnected and is incapable of
firing any fasteners.
d.
Release the Trigger again.
e.
Clean external surfaces with clean,
dry cloth.
f.
Store indoors out of children’s reach.