Omni Group GREEN SMART 864 - Manual (Page 15)

Installation
(for qualified installers only)
15
© Travis Industries 4090507 100-01217_000
Gas Line Location
The gas inlet is located 1-1/4" (32mm)
above the base of the fireplace.
9-1/4"
235mm
9"
229mm
Right Side Gas Inlet (preferred)
Left Side Gas Inlet
A 2" (51mm) by 3" (76mm) opening is
located behind the gas inlet cover plate. It is
centered 3" (76mm) above the base of the
fireplace.
You may remove this cover plate to install the gas line. The
cover plate has a 7/8" (22.2mm) diameter hole (covered with
a push plug) in line with the gas inlet on the gas control
valve. By rotating the plate 180° the hole may be re-located.
You may also secure the plate in a customized location using
the self-drilling screws.
A 8" (203mm) flex tube and shutoff
valve is included with the fireplace.
The shutoff valve accepts a 1/2"MPT.
A 8" (203mm) flex tube and shutoff
valve is included with the fireplace.
You may wish to use a 24" (610mm)
or 36" (914mm) flex tube. The shutoff
valve accepts a 1/2" MPT.
5-3/8"
137mm
An additional 2" (51mm) by 3" (76mm)
opening is located the left side. It is centered
3" (76mm) above the base of the fireplace.
You may remove this cover plate to install the
gas line. The cover plate has a 7/8" (22.2mm)
diameter hole (covered with a push plug) in line
with the gas inlet on the gas control valve. By
rotating the plate 180° the hole may be re-
located. You may also secure the plate in a
customized location using the self-drilling
screws.