Oki 6120i - Manual (Page 16)

I - 6
Section I - Hardware Installation
OKI OkiLAN 6120i User’s Guide
4. Pry off the breakaway panel next to the interface
connector with a screwdriver or knife
5. Insert the OkiLAN 6120i by sliding it along the rails
in the recess of the printer, until it is plugged into the
socket in the rear of the recess.
6. Attach the 10/100Base-T UTP cable to the recep-
tacle on the back of the OkiLAN 6120i. Attach the
other end of the cable to the Network.
Panel