Oki 6120i - Manual (Page 203)

VI - 12
Section 6 - Chapter 2 - OkiLAN 6120i Setup for Windows 95/98
OKI OkiLAN 6120i User’s Guide
You will now be able to use OkiLAN Connect for TCP/
IP. Whenever you print to the printer configured with
OkiLAN Connect, your print job will go directly to the
OkiLAN 6120i print server port.
Port Settings
If you have printing problems while using the OkiLAN
Connect printing port, you may check the status of the
port by selecting Port Settings under the Details tab in
the Properties screen.
OkiLAN Connect for DLC
OkiLAN Connect for Data-Link Control (DLC)
provides a direct printing solution for users in
Microsoft Windows 95/98 serverless environments
with the DLC/LLC protocol. Print jobs printed through
OkiLAN Connect are sent directly to the OkiLAN
6120i print server and not routed through the network
server, resulting in a reduction of network traffic.
OkiLAN Connect for DLC can be used to configure the
print server, obtain status from the print server and
printer, and send jobs to the printer.
System Requirements
To use OkiLAN Connect for DLC, your operating
system must be Windows 95/98 and the Microsoft 32-
bit DLC protocol must be installed.
Installation
To install OkiLAN Connect for DLC, follow the
instructions below:
1. Install OkiNet for DLC — see Section I.
2. When the installation is complete, click on Start,
Settings and then Printers.
3. Select the printer driver from which you would like
to print with OkiLAN Connect, then select
Properties from the File menu.
4. Add an OkiLAN Connect port. This may be done by
selecting Add Port under the Details tab.
5. In the Add Port window, select the radio button