Oki 6120i - Manual (Page 164)

IV - 71
Section 4 - Appendix B - Application Considerations
OKI OkiLAN 6120i User’s Guide
TCP/IP
4. Make sure the following entry is in the
“/etc/services” file:
printer 515/tcp spooler
5. Start inetd by typing the following at the UNIX
prompt:
/etc/inetd -c
Procedure
HP-UX uses an interactive utility called SAM (System
Administration Manager) to configure printing.
1. Login to the HP-UX system as root.
2. Invoke the SAM utility by typing sam at the UNIX
prompt. (We suggest you do this at the system
console. SAM uses a screen oriented interface that
works best at the console.)
3. Select the following options from the SAM menu:
Printers and Plotters ->
LP Spooler ->
Printers/Plotters ->
Actions -> Add a Remote Printer
(Do NOT add a Network Printer)
A form appears asking you to define a remote
printer.
4. Enter information into the following fields as
described.
a) Printer name - lj4
The name of the printer as referenced by the local
HP machine. Print jobs sent to this printer are
passed to the OkiLAN 6120i.
b) Remote system name - OKIPRINTER
The name of the OkiLAN 6120i on the network.
The name must also be in the
/etc/hosts file.