Oki 6120i - Manual (Page 201)

VI - 10
Section 6 - Chapter 2 - OkiLAN 6120i Setup for Windows 95/98
OKI OkiLAN 6120i User’s Guide
Chapter 2
OkiLAN 6120i Set Up for
Windows 95/98
Overview
This section contains instruction and information on
how to set up your OkiLAN 6120i for a Windows 95/
98 environment. Print options for Windows 95/98
include:
• OkiLAN Connect for TCP/IP
• OkiLAN Connect for DLC
• OkiLAN Connect for IPX/SPX
OkiLAN Connect for TCP/IP
OkiLAN Connect for TCP/IP is a full featured utility
that allows simple, direct, TCP/IP printing from your
computer to a printer attached to an OKI TCP/IP
enabled print server. With OkiLAN Connect, you can
even print to print servers using Dynamic IP addresses
(DHCP). Print jobs printed through OkiLAN Connect
are sent directly to the OkiLAN 6120i print server and
not routed through the network server, resulting in a
reduction of network traffic.
System Requirements
To use OkiLAN Connect for TCP/IP, your operating
system must be Windows 95/98 and your computer
must be configured to run TCP/IP. The OkiLAN 6120i
print server must also be configured to run TCP/IP.
Installation
To install OkiLAN Connect for TCP/IP:
1. Install the OkiLAN Connect for TCP/IP-see Section
I.
2. When installation is complete, click on Start,
Settings and then Printers.