Orbit Manufacturing Rokonet ORBIT-6 RP-206 - Manual (Page 10)

Installer Manual
10
Programming your Orbit-6
Programming Methods
Local Requirements
LED or LCD keypads
The keypad must be wired to the Orbit-
6 panel.
Power must be applied to the Orbit-6.
Orbit Programmer
Easy programming of the control panel
parameters with menu driven LCD
display.
The programmer can store up to 10
Orbit-6 programming sets and copy it
directly to the panel. The programmer
supports both the Orbit-5 and Orbit-6
panels.
The programmer will be connected and
receive its power from the panel.
Orbit UD*
Local Up/Load Windows version from a
personal computer.
The software must be installed and an
Orbit UD Adaptor cable is connected
between the panel and the computer.
Remote Requirements
Orbit UD*
Remote U/D Windows version from a
personal computer.
The software and applicable modem
with configured access to a telephone
line must be installed.
* Compatible with Windows 95/98/2000 & NT.