Orbit Manufacturing Rokonet ORBIT-6 RP-206 - Manual (Page 6)

Installer Manual
6
INTRODUCTION TO THE ORBIT-6
The
ORBIT-6 is intended to address the needs of many homes, offices, and small
businesses. Its operation is designed around microprocessor and EEPROM
(Electrically Erasable Programmable Read-Only Memory) technology, which stores,
without the need for a source of power, the system’s operating program and its
programmable parameters.
System programming may be performed from any
ORBIT-6 keypad, or from a special
LCD Programming Keypad designed specifically for that.
Remote and local system programming is also possible through the use of Rokonet’s
ORBIT Upload/Download software.
Main Features:
Zones (end-of-line resistor required 2200 ohm)
•
6 Programmable Intrusion Zones
•
Special type: Zone 5 – Fire Zone, Zone 6 - tamper zone
•
One Fixed Panic Zone input on the keypad (not on keypad RP206KL6)
•
3 Keypad Emergency Zones (Panic, Fire, Special Emergency)
Alarm Sounder Output
•
Programmable Bell/Siren or Loudspeaker Output
•
Capacity: 750 mA (maximum)
Auxiliary Output for Peripheral Devices
•
Capacity 250 mA (maximum)
Built-In Digital Communicator
•
For Central Station communications (two phone numbers)
•
For Upload/Download functions
•
For follow-me functions
Keypads
•
Up to 4 LED/LCD keypads can be connected
Utility Outputs
•
One transistor-driven (open-collector) triggered output
Security Codes
•
Two Installer Codes
•
One Master (User) Code
•
Nine User Codes (all may be used as duress code)
Periodic Testing
•
Daily test report to central station
Optional Peripherals
• Four relay outputs expansion
• Voice Module
Event Log
• Event log of 100 events