Orion 20VROT - Manual (Page 16)

14
POWER
SLEEP
TV MONI.
EJECT
MUTE
SPEED
SP/LP REC/OTR
PROGRAM
MENU
—
+
HOLD
ENTER
COUNTER
RESET
ZERO RETURN
REVEAL/
AT
R
F/T/B CANCEL
TEXT/ MIX/TV
TIMER REC
ST
OP
PLA
Y/SLOW
F.FWD
REW
SUB P
AGE
INDEX
PAUSE/STILL
CH/TRACKING PAGE
CALL
AV
1
2
3
4
5
6
7
8
0
9
—
+
VOLUME
To set the TV to turn off at a set time, press the SLEEP button on the remote control. The clock will count down
10 minutes each time the button is pressed in the order of 120, 110.....20, 10, 0. After the sleep time is
programmed, the display will disappear and will reappear every 10 minutes. To confirm the sleep time setting,
press the SLEEP button once and the remaining time will be a momentarily displayed. To cancel the sleep
time, press the SLEEP button repeatedly until the display turns to 0.
SLEEP
SLEEP
90
CALL
TV OPERATION
(CONTINUED)
CALL
SLEEP
Press the CALL button. The current time, channel
number, real time tape counter and tape operation will
be indicated.
Press the CALL button again to cancel the call display.
MUTE
MUTE
To cut off the sound, press this button once. The TV/
VCR will be silenced and the symbol "MUTE" will appear
on the screen. The muting can be released by pressing
the MUTE button again or the VOLUME +/– buttons.
NOTE: If the SLEEP button is pressed when the TV/VCR is in the REC mode, the clock will count down to shut off
the TV section at the set time, the recording will continue.
MUTE
CH 2
01 : 30 : 21 SP
11 : 30 SAT
Current time
VCR operation
Channel No.
Auto Repeat
Tape In
Tape Speed
Real Time Tape Counter