Orion 20VROT - Manual (Page 41)

39
SYMPTOM CAUSE SOLUTION PAGE
PLAYBACK
Noise bars on screen.
Can not locate INDEX
mark.
REMOTE CONTROL
Tracking is not adjusted.
Video heads are dirty.
The tape is worn or damaged.
The tape is worn or damaged.
Adjust the TRACKING control.
Clean the video heads.
Try another tape.
Try another tape.
24
39
-
-
6
6
6
6
6 Aim it at the remote control sensor.
Operate within 5 metres and reduce the
light of the room.
Clear the path of the beam.
Replace batteries.
Install batteries correctly.
Polarities of the batteries, + or –, are not
inserted correctly.
Batteries are weak.
Obstacle in the path of beam.
Distance too far or there is too much light in
the room.
It is not aimed at the remote sensor.
Remote control does not
work.
VIDEO HEAD CLOGGING
The video heads record and playback picture and sound on the video tape. In the event that they become
dirty you won't be able to do a perfect recording and the playback picture will be extremely snowy with
good sound. If this happens have the TV/VCR checked by qualified service personnel.
VIDEO HEAD CLEANING
AUTO HEAD CLEANING cleans the video heads automatically when a cassette is inserted or ejected.
This prevents dirt from accumulating onto the heads which can cause snowy picture.
When this happens (snowy picture) this signifies that the heads are either worn or needs cleaning,
consult your local service centre for servicing.
NOTES:
Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.
To help prevent video head cleaning, use only good quality VHS tapes. Discard worn tapes. •
•
Good Picture Snowy Picture